2kw Forklift Charger Single Phase 30V 30A 60A Czc7p-E30 Lithium Battery Charger

• Customization: Available
• Rated Power: 2kw
• Charging Current: 30A-60A
• Model NO.: CZC7P-E
• Input Voltage: 220V1p
• Type: Lithium Ion Battery Charger
• Charging Type: Electric Charger
• Principle: LLC
• Use: Lithium Battery Charger
• Input Power: 220V
• Maximum Output Voltage: 30V
• Overall Efficiency: 0.94
• Max Input Power: 2.6kw
• Rated Input Voltage: 220V/50Hz60Hz
• Maximum Output Power: 1.8kw
• Input Voltage and Current: 220V11.7A
• Output Voltage Range: 30V
• Output Voltage and Current: 30V30A60A
• Power Factor: 0.94
• Rated Output Current: 30A60A
• Size: 490*410*235mm
• Weight: 14kg
• Frequency: High Frequency Charger
• Transport Package: Carton
• Specification: 490*410*235mm
• Trademark: Shineng
• Origin: Shanghai, China
• HS Code: 8504409999
• Production Capacity: 50000
• Package Size: 49.00cm * 41.00cm * 24.00cm
• Package Gross Weight: 14.000kg

Product Description

Lithium Battery Charger Single Phase 30V 30A 60A 2KW CZC7P-E30 for industrial mobile power supply lithium ion battery

Introduction

1. Features

CZC7P intelligent charger uses modular structure design to parallel connection multiple-modules power supply and realize large current charging. This charger is equipped with host computer which communicates online with BMS (Battery Management System) through CAN and controls every power supply module through the RS485 port.
This modular design could make it easy to extend charging power supply module which realizes the extension of charging current. In addition, it could monitor the state of battery & charger in real time and control the whole charging process through the communication between CAN and RS485.
The host computer is equipped with suitable charging curve which could detect charging state and record relevant parameters of charger & battery during charging process. The charging process is performed automatically.

1. Applications

This device would be applicable to the charging of electrically driven vehicles, which uses lithium battery as power such as electric fork-lift truck ,pallet truck and AGV. 

1. Operating conditions

1) No higher than 1000 meters in altitude.
2) Ambient temperature between -10 and +40 degrees C.
3) Relative humidity not exceed 85% for conditions of ambient temperature around 20±5ºC.
4) No conducting dust;
5) No explosive danger;
6) No corrosive gas to metal and insulation, no steam;
7) No hit by snow and rain;
8) No violent vibration and impact;
9) In ventilated, dry place, no high temperature, dust and corrosive gas;
10) To ensure the operation properly, keep the air around the unit unobstructed and certain space, and check the vents for blockage.

Functions

1. CZC7P intelligent charger uses modular structure design to parallel connection multiple-modules power supply. The structure is simple and reliable.
2. Charge at constant current and limited voltage.
3. This charger could make comprehensive judgments about battery capacity according to the parameters such as charging time,constant voltage charging time and charging current at the end of the stage.
4. Host computer could set up parameters through touch panel. It has a number of functions, including data communication,fault memory and state memory.
5. Touch panel of host computer could not only display in real time the relevant data such as battery voltage,charging current,charging capacity,charging time during the charge process, but also set up charge parameters. Users are easily able to know operating status of the charger.
6. Though the communication interface RS485, host computer could receive charging data of all charge modules,send commands and record its charging data.
7. The high-brightness led panel could display the operating status of the charger.
8. SD card could record the charging data hundreds of times. And records could be read on PC. In this way, users could know every charging process.
9. Function of hardware and software double protection,over voltage protection and over current protection.
10. Functions of automatic detection,start-up delay,soft start-up and automatic shutdown after fully charged.
11. When turned on or when the power is reset, this device would automatically recover to the previous status.
12. Communication between host computer and power supply module failure protection function.
13. With communication function.

Technical data
1,Main technical parameters
CZC7P intelligent charger uses modular structure design to parallel connection multiple-modules power supply and realize large current charging. Users could choose the number of modules as needed, which could reach up to 12.
The power for a single module is 2kW. There are different specifications of modules, including 30V/60A,60V/35A,100V/20A , etc.
1) Single-phase AC (1/N/PE) or two-phase AC (2/PE) input power voltage. The code of the E, Frequency: 50/60Hz
 

Model	Input	The	Rated	Rated	Maximum	Maximum	Communi	Outline Dimension	Net
Parameter	power	number of power	input current	input power	output current of	output voltage of	cation Mode	mm	weight
ltem	V	supply   modules   (2kW/P C)	A	kVA	charger A	charger V	(optional function)		kg
E30/60	220	1	11.7	2.6	60	30	CAN	420×280×160	14
E30/100	220	2	19.5	4.3	100	30		530×440×350	25
E30/120	220	2	23.4	5.1	120	30		530×440×350	25
E60/30	220	1	11.7	2.6	30	60		420×280×160	14
E60/35	220	1	13.6	3.0	35	60		420×280×160	14
E60/70	220	2	27.3	6.0	70	60		530×440X350	25
E100/20	220	1	13.0	2.9	20	100		420×280×160	14
E100/40	220	2	26.0	5.7	40	100		530×440X350	25