Lead Acid Battery Charger Single Phase 4kw 48V 25A80A for Forklift Car Czb5c

• Customization: Available
• Rated Power: 4kw
• Charging Current: 25-80A
• Model NO.: CZB5C
• Type: Lead-Acid Battery Charger
• Charging Type: Electric Charger
• Principle: Half-Bridge Charger
• Use: Lead Acid Battery Charger
• Input Power: 100-400V
• Maximum Output Voltage: 48V
• Overall Efficiency: 0.64
• Max Input Power: 10kw
• Rated Input Voltage: 100-380V/50Hz
• Maximum Output Power: 4kw
• Input Voltage and Current: 100-400V
• Output Voltage Range: 48V
• Output Voltage and Current: 48V 25A-80A
• Power Factor: 0.64
• Rated Output Current: 25A-80A
• Size: 47X35X78cm
• Weight: 65kg
• Frequency: Power Frequency Charger
• Transport Package: Plywood Box
• Specification: 47x35x78cm
• Trademark: Shineng
• Origin: Shanghai, China
• HS Code: 8504409999
• Production Capacity: 50000

Product Description

Lead Acid Battery Charger Single Phase 2kw 36V 25A40A  For Forklift Car CZB5C

1. Features

CZB5C Series Intelligent Charger is the organic combination of leakage transformer, technology of Silicon-controlled rectifier and Microcomputer Control. This device could optimize

Wsa+Pulse charging characteristic curve. As charge voltage of battery increases, charge current

decreases automatically.

Pulse charge would be performed before gas emissions or in late stage of recharge. On the premise

of guarantee adequate battery power, this device would lower greatly internal temperature and reduce

gas emissions of battery, prolong the life of battery effectively and raise the charging efficiency

eventually.

The whole product has simple structure, convenient operation, complete functions and high

efficiency

 

2.Applications

This device would be applicable to recharge of lead-acid batteries which could be used in

various electric vehicle such as power pallet trucks, fork-lift truck, lift truck, electronic tour bus.

3.Operating conditions

1) No higher than 1000 meters in altitude.

2) Ambient temperature between -10 and +40 degrees C.

3) Relative humidity not exceed 85% for conditions of ambient temperature around 20±5ºC.

4) Store in a place free from conductive dust & the risk of explosion.

5) Do not store in harmful atmosphere such as corrosive gas, insulating gas, steam.

6) Store in a place free from rain & snow.

7) Deviation from vertical shall be less than 5 degrees. Working situation without violent vibration and

striking.

 

Functions

1) There are various charging modes you can choose. This device would be suitable for different

uses of lead-acid battery charging. Before leaving the factory, different charging procedures

would be set up accordingly depending on types of batteries.3

--IWUIa+ Pulse multistage charging mode. Applicable to charging of ordinary lead-acid

batteries.

--IWUIa+EQU multistage charging mode. Applicable to equalization charging of

ordinary lead-acid batteries.

--IWIa multistage charging mode. Applicable to initial & desulfuration charging

of ordinary lead-acid batteries.

--IWUUa multistage charging mode. Applicable to charging of maintenance-free lead

acid batteries.

2)

The voltage and current double closed-loop framework is applied in the PID control technology.

This device can achieve dynamic tracking and automatic adjustment of charge parameters.

Charging procedure operates referring to corresponding recharge characteristic curve. Charge

current always meets the requirements of batteries for this parameter.

3)

High-intensity LED Lamp would indicate running state of this charging unit.

4)

Nixie tube would display charger parameters such as battery voltage, charge current &

capacity and recharged time. It could also show the code of charging curve and fault.

5)

Functions of automatic detection, delaying and soft-start.

6)

Function of temperature compensation. The voltage of tipping point of gas emission would

change with the temperature.

7)

Automatically measure the battery capacity and adjust the charging curve in real-time. On the

premise of guarantee adequate battery power, this device would lower greatly internal

temperature of battery, reduce gassing and shorten charging time at the same time.

8)

This device could also record data at the end of recharge for 30 times.

9)

Protection and alarm functions of open circuit, reverse connection, over load and short

circuit breakdown.

10) Protection and alarm functions of overheat fault of transformer and module.

11) During charging, once the connection cable falls off, this device would shut down

automatically.

12) Equalization charge could ensure capacity consistency of battery packs.

13) Function of automatic initial charge(This feature is only applicable to ordinary lead-acid

batteries).

--Initial charge must be performed for the first recharge of new batteries after addition of4

liquid electrolyte.

14) Function of desulfuration Charge(This feature is only applicable to ordinary lead-acid batteries.)

Battery aging, frequently idled or improperly maintained, these all would result in the formation of lead

sulfate crystal on electrode plates. In this condition, conventional charge would not be applicable any

more, desulfuration charge shall be used instead.

 

Single-phase AC(1NPE) or two-phase AC(2PE) input power

voltage. The code of the E, Frequency:50-60Hz.

 

Specification	Input current A		Input power kVA	Output current DCA	Battery parameters		Outline dimension    mm	Net weight kg
	@220V	@380V			V	Ah
						7.5-10h
E24V/20A	3.4		0.8	20	24	115-160	240×350×260	21
E24V25A	4.3		0.9	25	24	145-200	240×350×2 60	21
E24V/30A	5.1		1.1	30	24	175-240	240×350×260	21
E24V/35A	6.0		1.3	35	24	205-280	240×350×260	21
E24V40A	6.8		1.5	40	24	230-320	240×350×260	24
E24V45A	7.7		1.7	45	24	260-360	240×350×260	24
E24V50A	8.5		1.9	50	24	290-400	240×350×260	26
E24V55A	9.4		2.1	55	24	320-440	240×350×260	26

E24V65A	11.1	6.4	2.4	65	24	375-520	466×360×783	40
E24V/80A	13.6	7.9	3.0	80	24	465-640	466×360×783	40
E36V/30A	7.7		1.7	30	36	175-240	240×350×260	24
E36V/35A	8.9		2.0	35	36	200-280	240×350×260	25
E36V/40A	10.2		2.3	40	36	230-320	240×350×260	25
E48V/25A	8.5		1.9	25	48	145-200	240×350×260	25
E48V/30A	10.2		2.3	30	48	175-240	240×350×260	28
E48V/35A	11.9		2.6	35	48	205-280	240×350×260	28
E48V/45A	15.3	8.9	3.4	45	48	260-360	466×360×783	42
E48V55A	18.8	10.9	4.1	55	48	320-440	466×360×783	46
E48V65A	22.2	12.8	4.9	65	48	375-520	466×360×783	50
E48V80A	27.3	15.8	6.0	80	48	465-640	466×360×783	56
E72V/25A	12.8		2.8	25	72	145-200	280×430×260	34
E72V/30A	15.3		3.4	30	72	175-240	280×430×260	34

 

2)Three-phase AC(3/PE) input power voltage. The code of the D, Frequency: 50/60Hz

 

Specifcation	Input current A			Input power kVA	Outpu t curre nt neA	Battery parameters		Outline dimension mm	Net weig ht kg
	@220V	@380V	@415V			V	Ah
							7.5-10h
D48V55A	10.8	6.3	5.7	4.1	55	48	320-440	466×360×783	62
D48V/65A	12.8	7.4	6.8	4.9	65	48	375-520	466×360×783	65
D48V80A	15.7	9.1	8.3	6.0	80	48	465-640	466×360×783	68
D48V/100A	19.7	11.4	10.4	7.5	100	48	580-800	526×360×883	86
D48V/120A	23.6	13.7	12.5	9.0	120	48	700-960	526×360×883	95
D80V65A	21.3	12.3	11.3	8.1	65	80	375-520	526×360×883	87
D80V70A	23.0	13.3	12.2	8.8	70	80	405-560	526×360×883	87
D80V80A	26.2	15.2	13.9	10.0	80	80	465-640	526×360×883	89
D80V/100A	32.8	19.0	17.4	12.5	100	80	580-800	526×360×883	95
D80V/120A	39.4	22.8	20.9	15.0	120	80	700-960	526×360×883	107
D96V/70A	30.4	17.6		11.6	70	96	405-560	680×450×1190	70
D96V80A	34.8	20.1		13.2	80	96	465-640	680×450×1190	75
D96V/90A	39.1	22.6		14.9	90	96	520-720	680×450×1190	85
D96V/100A	43.4	25.1		16.6	100	96	580-800	680×450×1190	95
D96V/125A	54.3	31.4		20.7	125	96	725-1000	680×450×1190	120
D96V/150A	65.2	37.7		24.8	150	96	870-1200	680×450×1190	145
D96V/170A	73.8	42.8		28.1	170	96	985-1360	680×450×1190	165
D120V/160A	86.9	50.3		33.1	160	120	930-1280	680×550×1400	220
D120V/180A	97.7	56.6		37.2	180	120	1045-1440	680×550×1400	250
D120V/200A	108.0	62.9		41.4	200	120	1160-1600	800×550×1400	245
D120V/220A	119.0	69.2		45.5	220	120	1275-1760	800×550×1400	270
D312V/20A	28.2	16.3		10.8	20	312	115-160	526×360×883	89
D324V/20A	29.3	17.0		11.2	20	324	115-160	526×360×883	89

 

 

 

 

 

Company Information